Samsung HL-R5087W Projection Television User Manual


 
Your New Wide TV
English - 10
Replacing the Lamp
•Why do I need to replace the lamp?
The lamp used in a DLP TV has a limited lifespan. For the best screen quality it needs to be replaced
periodically. After replacing the lamp, the screen quality will be bright and clear as new.
When do I need to replace it?
It should be replaced when the screen becomes darker, less clear or when the Lamp indicator on the
front are flashing.
Check before lamp replacement
1. The lamp must be the same code number and type.
2. The lamp type is indicated on the left side of the TV. It is also indicated on the lamp case.
3. After checking the code number for the lamp, give the code number to the store where you
purchased the TV or to a Samsung Service center.
Caution
1. Replace with the correct code numbered lamp to avoid damage to the TV.
2. Turn the power off and wait for 30 minutes before replacing the lamp as it will be hot.
3. Do not touch the glass part of the lamp with your bare hands nor insert any foreign object inside
the cover as it may cause poor screen quality, electric shock or fire.
4. Do not place the old lamp near flammable objects or within the reach of children.
5. Be sure to connect this TV directly to an AC wall outlet. If the TV's AC plug is connected to a cable
box or other source, it will not allow for proper cool down time.
Viewing Position
To optimize your viewing comfort, please follow the guidelines below for viewing distance.
If viewing for an extended period of time, sit as far back from the screen as possible.
Make sure to put the product
at a distance (of about 10cm/
4inch) from the wall so that
adquate ventilation can be
provided.
Failure to do so may cause
the critical effect in the
expected life span of the
product or the quality.
1_BP68-00448A-01(02~17) 1/20/05 5:09 PM Page 10