Filter
Top Products
Setting The On/Off Melody
You can hear clear melody sound when the TV is powered On or Off.
1
Press the Menu button. Move
the joystick down to select
SETUP, then press the joystick
to enter.
2
Move the joystick down to
select Melody.
3
Move the joystick to the right
or left to select “On”.
4
Press the Menu button to exit.
37
Labeling the Channels
Use this feature to assign an easy-to-remember label to any channel (i.e., “CBS”, “ESPN”,
“PBS2”, CNN1”, etc.) A label consists of four fields, where each field is a letter, a number, or a
blank. When the DISPLAY button is pressed, the channel label will appear next to the channel
number.
1
Press the CH or CH but-
ton to tune to the channel that
will be labeled.
2
Press the Menu button. Move
the joystick down to select
SETUP, then press the joystick
to enter.
3
Press the joystick to enter.
Move the joystick down to
select Labeling.
4
Move the joystick to the right
to begin labeling. (Each label
has four fields. See top para-
graph.)
Move the joystick up or down
to select a letter, a number, or
a blank. (Pressing the CH but-
ton results in this sequence:
A,B,...Z, blank,0,1,...9).
5
Move the joystick to the right
to switch to the next field,
which will be selected. Select
a second letter or digit using
joystick(up or down), as
above. Repeat the process to
select the last two digits.
Press the Menu button to exit.
Operation
36
Move Select Menu