Samsung HLN467W Projection Television User Manual


 
6968
Changing the Picture-in-Picture Channel
After you set the PIP signal source (antenna or cable), it is easy to change channels.
1
Press the Menu button. Move
the joystick down to select
PIP, then press the joystick to
enter. Quick way to access PIP
channel: Just press PIP CH
(,) on the remote control.
2
Move the joystick down to
select Channel.
3
Move the joystick to the right
or left to change the channel
of the PIP image.
4
Press Menu to exit.
NOTE
The PIP channels are not available when RF is set to ANT-B.
(The PIP channels link to ANT-A).
Changing the Size of the PIP image
1
Press the Menu button. Move
the joystick down to select
PIP, then press the joystick to
enter. Quick way to access PIP
Size: Just press Size on the
remote control.
2
Move the joystick down to
select Size.
3
Move the joystick to the right
or left to select Large,
Double1, Double2 or
Small.
Note: Double function doesnt
operate In the Component,
PC, DVI mode.
4
Press Menu to exit.
Special Features