Filter
Top Products
67
Special Features
66
Swapping the Contents of the PIP and Main image
1
Press the Menu button. Move
the joystick down to select
PIP, then press the joystick to
enter. Quick way to access PIP
Swap: Just press “Swap” on
the remote control.
2
Move the joystick down to
select “Swap”.
3
Move the joystick to the right or
left.
The channel in the PIP image will
appear in the main image, and
vice versa.
4
Press Menu to exit.
NOTE
• When ANT-B, Component mode, PC, or DVI is selected, the PIP Swap function doesn’t work.
Selecting a Signal Source (Antenna or Cable) for PIP
If the PIP source is TV during PIP ON, you can select the broadcasting source of PIP picture sepa-
rately from the main picture. (If the main picture is ANT-B and the broadcasting sources are differ-
ent, making adjustments is necessary.)
1
Press the Menu button. Move
the joystick down to select
PIP, then press the joystick to
enter.
2
Move the joystick down to
select “Air or CATV”.
3
If an antenna is connected,
the setting is “AIR.” If a Cable
TV system is providing the sig-
nal, move the joystick to the
left or right until the appropri-
ate type of cable system is
displayed (“STD,” “HRC,” or
“IRC”).
4
Press Menu to exit.