Filter
Top Products
Changing the Location of the PIP Image
1
Press the MENU button. Press the ▲ or ▼ button to
select “Picture”, then press the ENTER button.
2
Press the ▲ or ▼ button to select “PIP”, then press
the ENTER button.
3
Press the ▲ or ▼ button to select “Position”, then
press the ENTER button.
4
Press the ▲ or ▼ button to select PIP position you
want, then press the ENTER button.
5
Press the MENU button to exit.
52
Mode : Custom √
Custom √
Color Tone : Normal √
Color Control √
DNIe : On √
Size : 16:9 √
PIP √
Picture
Move Enter Return
PIP
Selecting a Signal Source (Antenna or
Cable) for PIP
If the PIP source is TV during PIP ON, you can select the broadcasting source of PIP picture
separately from the main picture.
1
Press the MENU button. Press the ▲ or ▼ button to
select “Picture”, then press the ENTER button.
2
Press the ▲ or ▼ button to select “PIP”, then press
the ENTER button.
3
Press the
▲ or ▼
button to select “Air/CATV”, then
press the ENTER button.
4
If an antenna is connected, the setting is “Air”. If a
Cable TV system is providing the signal, press the
▲ or ▼ button until the appropriate type of cable
system is selected (“STD”, “HRC” or “IRC”).
5
Press the MENU button to exit the menu.
Mode : Custom √
Custom √
Color Tone : Normal √
Color Control √
DNIe : On √
Size : 16:9 √
PIP √
Picture
Move Enter Return
53
PIP : On √
Source : TV √
Swap √
Size : √
Position : √
Air / CATV : Air √
Channel : Air 4 √
PIP
Move Enter Return
PIP : On √
Source : TV √
Swap √
Size : √
Position : √
Air / CATV : Air √
Channel : Air 4 √
PIP
Move Enter Return
PIP : On
Source : TV
Swap
Size :
Position :
Air / CATV : Air
Channel : 4
PIP
Move Enter Return
Move Enter Return
PIP : On
Source : TV
Swap
Size :
Position :
Air / CATV :
Channel : 4
PIP
Move Enter Return
PIP : On
Source : TV
Swap
Size :
Position :
Air / CATV :
Channel : 4
Air
STD
HRC
IRC
PIP : On
Source : TV
Swap
Size :
Position :
Air / CATV : Air
Channel : 4
PIP
Move Enter Return
Air
STD
HRC
IRC