Filter
Top Products
3.7
Setting the Time and Date
First, select the channel that has a Digital Signal.
1
Press the MENU button on the remote control.
2
Use the Menu Up/Down buttons
to highlight the Setup icon and
press ENTER.
Use the Menu Up/Down buttons
to highlight the Auto Time Setup
icon and press ENTER.
3
You will be asked if your local
area observes Daylight Saving
Time. Use the Menu Up/Down
buttons to highlight Yes, or No,
and press ENTER.
4
Use the Menu Up/Down/Left/
Right buttons to highlight the
time zone for your local area
(and to move highlight to the
appropriate time zone on the
map of the United States). Press
ENTER.
That’s it. As you have received a digital signal, the time will be
set automatically.
5
Press EXIT
CHAPTER THREE
Operation
3
3
MD68-00278A(E)-CHAPTER 3 8/26/02 1:42 PM Page 7