Filter
Top Products
4.6
Choosing a Digital Sound Format (Dolby or PCM)
Both analog and digital sounds can be output from the rear-panel connectors on your Set-
Top Box. The digital sound outputs are optical and coaxial connectors labeled “Dolby
Digital Output.” After connecting an optical or a coaxial digital-audio component, you
must specify the transmission format (Dolby or PCM, as appropriate to your component).
1
Press the MENU button on the remote control.
2
Use the Menu Up/Down buttons to
highlight the Setup icon and press
ENTER.
Use the Menu Up/Down buttons to
highlight he Sound Output icon and
press ENTER.
3
Use the Menu Up/Down buttons to
choose the appropriate format
(Dolby or PCM)and press ENTER.
4
Press EXIT.
NOTE
In Analog mode, only PCM is supported.
CHAPTER FOUR
Special Features
4
4
MD68-00278A(E)-CHAPTER 4 8/26/02 2:50 PM Page 6