Samsung TSL 2795HF CRT Television User Manual


 
CHAPTER THREE: TV OPERATION 3.9
OPERATION
Labeling the Channels
Use this feature to assign an easy-to-remember label to any channel (i.e., CBS, ESPN,
PBS2, CNN1, etc.) A label consists of four fields, where each field is a letter, a num-
ber, *, or a blank. When the Display button is pressed, the channel label will appear
next to the channel number.
1
Press the CH or CH button
to tune to the channel that will
be labeled.
2
Press the Menu button to dis-
play the menu.
Press the CH button twice
to highlight CHANNEL.
Press the VOL + button.
3
Press the CH button five
times to select Labeling.
Press the VOL + button to begin
labeling. The left-most field will
be highlighted.
(Each label has four fields. See
top paragraph.)
4
Press the CH or CH but-
ton to select a letter, anumber,
*, or a blank. (Pressing the
CH button results in this
sequence: A, B, ...Z, *, blank, 0,
1,... 9).
Note: You cannot select
Labeling in the A/V mode.
5
Press the VOL+ button to
switch to the next field, which
will be highlighted. Select a
second letter or digit using the
the CH and CH buttons,
as above.
Repeat the process to select
the last two digits.
Press Menu twice to set the label and clear the menus from
the screen.
01066D(E)-CHAPTER 3 4/12/05 9:26 AM Page 9