Samsung TSL 2795HF CRT Television User Manual


 
4.1 CHAPTER FOUR:SPECIAL FEATURES
Chapter Four
SPECIAL FEATURES
Customizing Your Remote Control
Your TV comes equipped with a “universal” remote control. In addition to
controlling the TV, the universal remote can also operate a VCR, DVD and a cable box
(even if your VCR and cable box are made by manufacturers other than Samsung).
Note: The remote control might not be compatible with DVD Player, VCR, Cable box and others
manufactured by another company.
Setting Up Your Remote Control to Operate Your VCR (or DVD)
1
Turn off your VCR (or
DVD.)
2
Press the MODE button and make sure that the VCR (or DVD)
LED is illuminated.
3
On your Samsung remote control, press Set.
The remote control has four
“modes”: “TV,” “VCR”, “Cable” and
“DVD.” Press the “MODE” button
to switch the remote control to the
“VCR” (or DVD) mode.
4
Enter 3 digits of the VCR (or DVD) code listed on the next
page for your brand of VCR (or DVD).
Make sure you enter 3 digits of the
code, even if the first digit is a 0.
If more than one code listed, try the
first one.
5
Press the Power button on the remote control. Your VCR
(or DVD) should turn on. If your VCR (or DVD) turns on, your
remote control is now set correctly.
If your VCR (or DVD) does not
turn on, repeat steps 2, 3, and 4, but
try one of the other codes listed for
the brand of your particular VCR (or
DVD).
If no other codes are listed, try each
code, 000 through 089.
6
Once your remote control is set up, press the MODE button
any time you want to use the remote to operate your VCR (or
DVD).
When your remote control is in
the VCR(or DVD) mode, the volume
buttons still control your TVs volume.
When your remote is in the TV
mode, the VCR control buttons (PLAY,
PAUSE, etc.) will still operate your
VCR.
01066D(E)-CHAPTER 4 4/12/05 9:29 AM Page 1