Filter
Top Products
OPERATION
English - 22
1
Press the POWER button
on the remote control.
The “Start Plug & Play” is
displayed.
Press the ENTER button,
then the “Language” is
displayed.
3
Make sure that the
antenna is connected to
the TV.
Press the ENTER button,
then “Antenna” is
displayed.
2
Press the … or † button
to select the desired
language, then press the
ENTER button.
The“Check antenna input.”
is displayed.
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the front panel.
Plug & Play Feature
When the TV is initially powered On, basic customer settings proceed automatically and
subsequently: Setting the language, Antenna input check, Channel Memorize and Time
Setting.
• The Plug & Play function operates after plugging in the TV for the first time.
Plug & Play
Start Plug & Play
Enter Exit
OK
Plug & Play
Move Enter Skip
Language
English
Español
Français
Plug & Play
Check antenna input.
Enter Skip
OK
œ Plug & Play feature is available in
the TV and DTV mode only.
œ Even if ENTER button is not
pressed, the “Language” will be
displayed automatically.
OPERATION
Chapter Three
continued...
AA68_03783A_00Eng 3/17/06 4:32 PM Page 22