Samsung SCR-3000P DVR User Manual


 
4-4
4-3
DIGITAL VIDEO RECORDER
Similarly, press the UP() or DOWN() button so current minute is displayed.
Then if pressing the LEFT(
) or RIGHT() button, the cursor is changed so hour or
second is changed. For example, press the RIGHT(
) button to change seconds and
setup by pressing the UP(
) or DOWN() button so current second is displayed.
The cursor is changed as follows if pressing the ENTER( ) button after setting al
hours. You may change other settings by pressing the LEFT(
) or RIGHT() button.
Example of menu setting (in case of changing time)
Press the MENU button and then press the ENTER( ) button when the cursor
points out the CLOCK/DISPLAY MODE SETUP. Then following screen appears.
Press the DOWN() button so the cursor points out TIME.
Then if pressing the ENTER( ) button, the cursor is changed so hour may be
changed.
Press the UP() or DOWN() button so current time (hour) is displayed.
Then if pressing the RIGHT(
) button, the cursor is changed so minute may be
changed.
CLOCK/DISPLAY MODE SETUP
DATE 2003-06-01 SUN
TIME 12:00:00
DATE DISPLAY TYPE YYYY-MM-DD
DATE & TIME DISPLAY ON
DATE & TIME POSITION RIGHT
STATUS DISPLAY ON
STATUS POSITION LEFT
MOVE=[//
/
] SELECT=[ ] EXIT=[MENU]
CLOCK/DISPLAY MODE SETUP
DATE 2003-06-01 SUN
TIME 12:00:00
DATE DISPLAY TYPE YYYY-MM-DD
DATE & TIME DISPLAY ON
DATE & TIME POSITION RIGHT
STATUS DISPLAY ON
STATUS POSITION LEFT
MOVE=[//
/
] SELECT=[ ] EXIT=[MENU]
CLOCK/DISPLAY MODE SETUP
DATE 2003-06-01 SUN
TIME 09:00:00
DATE DISPLAY TYPE YYYY-MM-DD
DATE & TIME DISPLAY ON
DATE & TIME POSITION RIGHT
STATUS DISPLAY ON
STATUS POSITION LEFT
MOVE=[//
/
] SELECT=[ ] EXIT=[MENU]
CLOCK/DISPLAY MODE SETUP
DATE 2003-06-01 SUN
TIME 09:34:00
DATE DISPLAY TYPE YYYY-MM-DD
DATE & TIME DISPLAY ON
DATE & TIME POSITION RIGHT
STATUS DISPLAY ON
STATUS POSITION LEFT
MOVE=[//
/
] SELECT=[ ] EXIT=[MENU]
CLOCK/DISPLAY MODE SETUP
DATE 2003-06-01 SUN
TIME 09:34:27
DATE DISPLAY TYPE YYYY-MM-DD
DATE & TIME DISPLAY ON
DATE & TIME POSITION RIGHT
STATUS DISPLAY ON
STATUS POSITION LEFT
MOVE=[//
/
] SELECT=[ ] EXIT=[MENU]