Samsung SCR-3000P DVR User Manual


 
7-5 7-6
DIGITAL VIDEO RECORDER
4
Alarm Record Retrieval
Among the data on the HDD, the ones that were recorded when an alarm was triggered will be
displayed as a list based on the recording start time.
Other information is same as in “3. Recorded Data List View” on p. 7-4.
Note
Note
If the list of the recorded data cannot be shown in a screen, you can use the LEFT()
or RIGHT(
) button to view the list in pages. Press the LEFT() button to move to the
previous page, or press the RIGHT(
) button to move to the next page.
Note
Note
- If the list of the recorded data cannot be shown in a screen, you can use the
LEFT(
) or RIGHT() button to view the list in pages. Press the LEFT() button to
move to the previous page, or press the RIGHT(
) button to move to the next page.
- In DVR MENU, if MULTIPLEXER of SYSTEM SETUP is set to WITH, MOTION EVENT
SEARCH of SEARCH MENU will be disabled.
5
Searching Motion Detection Recordings
Of those data recorded on the HDD, the ones recorded by motion detection will be listed in
order of recording start time. Other information is same as in "3. Viewing the Recorded Data
List" on page 7-4.
ALARM EVENT SEARCH [01/03]
ID EVENT DATE TIME
01 ALARM START 2003-07-13 17:25:52
02 ALARM START 2003-07-12 06:37:38
03 ALARM START 2003-07-11 11:54:34
MOVE=
[//
/
]
SELECT=[ ] EXIT=[SEARCH]
MOTION EVENT SEARCH [01/03]
ID EVENT DATE TIME
01
MOTION
START 2003-07-13 22:42:16
02
MOTION
START 2003-07-12 14:24:45
03
MOTION
START 2003-05-11 06:13:52
MOVE=
[
//
/
]
SELECT=[ ] EXIT=[SEARCH]