Filter
Top Products
34_ live
live
GETTING STARTED
Starting the system
1. Connect the power cable of the DVR to the wall outlet.
M
It takes about 10 seconds to display the start screen after
booting.
2. You will see the initialization screen.
The initialization process will last about 1 minute.
If a new HDD is installed, the initialization process may
take longer.
3. The live screen appears with a beep.
Shutting Down the System
You can shut down the system only if you have logged in to the DVR.
You require permission to shut down the system if you are not logged in as admin.
1. Press the [POWER] button on the remote control or the
front panel, or right-click to display the context sensitive
menu and select <Shutdown>.
2. The “Shutdown” confirmation window appears.
3. Use the arrow keys on the remote control or the front
panel to move to <OK> and press the [ENTER] button or
click <OK>. The system will shut down.
4. Press the [POWER] button again to restart.
M
For the permission management, refer to “Permission
Management > Setting Permissions”. (Page
54)
REC
2012-01-01 01:10:25
2012-01-01
01:10:25
2012-01-01 01:10:25
2012-01-01
01:10:25
Shutdown
Are you sure to shutdown?
OK Cancel