Filter
Top Products
English _25
CONNECTING WITH OTHER DEVICE
CONNECTING THE USB
1. By factory default, a USB port is provided for external connection.
2. You can connect a USB HDD, USB memory or mouse to the USB port.
3. If a USB HDD is connected to the system, recognition and settings are available in “Main Menu > Setting the
Device > Storage Device”. (Page
61)
4. This product supports hot-plugging, which connects/removes the USB device during the system operation.
J
If you use the USB device for Backup purposes, format it with FAT32 on PC if it is not formatted on the DVR.
CONNECTING THE CAMERA (SED-1001R, SEB-1005R, SEB-1007R)
Equipped with the IR LED and the illumination sensor, enables you to monitor at night as well as in daytime.
The camera is suitable for both internal and external use.
Name Description
a
Camera Fitting
Groove
Groove that is used to fit the camera bracket.
There are two grooves; one on the top and one on the bottom.
b
IR LED These infrared LED's are controlled by the illumination sensor.
c
Lens
Focal length of 3.6mm enables you to cover relatively longer range of monitoring.
d
Illumination Sensor Detects incoming light to control the IR LED.
e
DVR Connection
Cable
Connect the cable directly to the DVR without using a particular power cable.
You can use the RJ-45 cable to connect to a remote camera.
e
a
e
a
SEB-1007RSEB-1005R
cb d
e
SED-1001R
d
b
c