Samsung SHR-2041 DVR User Manual


 
SHR-2040/2041/2042 USER’S MANUAL
9-47
Sequence Time
- When connecting with SHR-2040/2041/2042 in the monitoring mode, set the
auto sequence time if the auto sequence is set. The time can be set from 10 to
20 minutes.
OSD Display
- Sets if OSD shall be displayed on each channel of Smart Viewer.
- Whether you check “Enable” or not, OSD will appear or not.
However, Audio icon, PTZ icon, REC icon, and Alarm/Motion event icon will not
be affected by the OSD condition.
Callback Connection
- Sets the port for Callback connection.
Auto Connection
- Sets if the smart viewer is automatically connected to SHR-2040/2041/2042 or
site at the initial operation.
- If you check “Auto Connection On”, the names of SHR-2040/2041/2042 and Site
currently registered at the DVR/Site list will be displayed in the following list. If
you select one from the list, the smart viewer will connect to the selected
SHR-2040/2041/2042 or Site when it operates later.
Language
- Sets the language used in the SmartViewer.
SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-47