Samsung SHR-2041 DVR User Manual


 
5-8
HDD Setup
HDD Information
Displays the number, capacity, and status of ATA and USB device. Setup is not available.
Status : Internal HDD, External HDD, Backup HDD
External HDD Setup
1. Backup/External type
You are able to determine the usage of USB.
Not Defined Appears when the usage of connected HDD is not defined.
You can set to External or Backup type.
No Device Appears when there is no HDD connected. You are able to connect it by
pressing the right connection TAB after connecting HDD
External Appears when the connected HDD is set to External type. It may used as a
backup HDD if you press the “Enter” key and turn to Backup.
Backup Appears when the connected HDD is set to Backup. If you press the “Enter”
key and turn to External(Extend), it can be used as an External HDD.
Caution
Caution
[Device Erase]
Data will not be deleted in the backup mode.
Please be sure to stop the backup before you delete a data. In the recording mode, suspend
the recording and delete a data.
Caution
Caution
[USB S/W Upgrade]
Download the software to upgrade at http://www.sec.co.kr, CCTV Part.
If the USB memory to upgrade has a format not being supported by DVR set, the upgrade is
impossible.
In this case, use the “device erase” of menu 5-7 system information and setup.
Only one file to upgrade is allowed in the USB Memory.
SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 5-8