Filter
Top Products
9-50
! To add a new DVR(SHR-2040/2041/2042)
- If you press the [New] button, the following window will pop up where you are
able to add a new DVR(SHR-2040/2041/2042) information.
1. Network Modes - LAN
- If DVR(SHR-2040/2041/2042) is connected to the LAN, set the network mode
to LAN.
- If the LAN connected to DVR(SHR-2040/2041/2042) uses Static IP, select
Static IP in the Address Type and input the name and IP address of
DVR(SHR-2040/2041/2042).
- You should select a PORT in accordance with the PORT number set at the
DVR(SHR-2040/2041/2042) network menu.
- If the Dynamic IP has been allocated for the ADSL that connected with
DVR(SHR-2040/2041/2042) through the DHCP or PPPoE, select
DHCP/ PPPoE in the Address Type and input the name and MAC address of
DVR(SHR-2040/2041/2042).
- You should select a PORT in accordance with the PORT number set at the
DVR(SHR-2040/2041/2042) network menu.
SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-50