Samsung SHR-2042 DVR User Manual


 
5-16
3
Monitoring
Event Monitoring
It is possible to set to Off/3sec/5sec/10sec/20sec/30sec/Continuous.
Off : Event Monitoring does not operate to turn to the screen where an event occurs.
3sec/ 5sec/ 10sec/ 20sec/ 30sec : Sets the duration time of screen in the Auto Sequence
mode.
Continuous : The Event Monitoring screen remains alive until you press the “Alarm”
button in the front to cancel the screen manually.
OSG Display
Date :
The date is displayed on the screen when it is On, and not displayed when it is Off.
Time :
The time is displayed on the screen when it is On, and not displayed when it is Off
.
Cam name : The Cam name is displayed on the screen when it is on, and not displayed
when it is off.
Status :
Audio/Ptz is displayed on the screen when it is on, and not displayed when it is off.
Spot Out Channel
Spot Out channel is used to let one of two monitors monitor a channel, focusing on it.
Spot Out channel supplies two functions, continuous monitoring of only one channel and
Auto Sequence to display all the channels one by one.
Auto Sequence setup ranges from Ch1 to Ch 4.
In the Auto Sequence mode, Spot Out channels are displayed in turn.
Duration time for Auto Sequence is as same as set for Camera setup.
Spot Out Event Monitor
Sets if event monitoring will be executed for Spot Out channels.
Off : The event monitoring dose not operate in the Spot Out channel.
3sec/ 5sec/ 10sec/ 20sec/ 30sec : Sets the duration time of screen in the Auto Sequence
mode.
Continuous : Once scrolled down, the screen remains displayed until you delete “Alarm”
LED in the front manually.
SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 5-16