Filter
Top Products
6-2
● Other PTZ Camera Control Modes perform its control in a single screen. Press the channel
selection button in the left front to select the PTZ setting channel and press the PTZ button.
If you succeed in entering Single Screen PTZ Camera Control Mode, the PTZ symbol on
the screen will turn yellow from white while the PTZ button will turn blue. Single Screen PTZ
Camera Control Mode supports Pan, Tilt, and Zoom operation basically and Preset, Camera
Menu, and other functions additionally.
● Press the PTZ button in Live Mode to cancel PTZ Camera Control Mode. After cancellation,
the PTZ symbol on the screen will turn white from yellow while the PTZ button will lose its
blue light.
Note
Note
If you select Remote Control Device, you may not control PTZ Camera with
SHR-2040/2041/2042. It’s because the PTZ button in front of SHR-2040/2041/2042
remains inactivated.
Press the PTZ button and the PTZ ban icon( ) will appear. It’s because the RS-485 port
setup was done for Remote Control Device.
The some functions of PTZ camera are used under restriction.
[SHR-2040]
[SHR-2041]
[SHR-2042]
SHR-2040/2041/2042-ENG-1 2005.6.29 4:59 PM Page 6-2