Filter
Top Products
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the (Power) button on the front panel.
Plug & Play Feature
When the TV is initially powered On, basic customer settings proceed automatically and subsequently:
Setting the language, checking the antenna input, memorizing the channels, and setting the time.
NOTE
• The Plug & Play function operates after plugging in the TV for the first time.
English - 26
Operation
1
If the television is in Standby mode, press
the POWER button on the remote control.
The message Start Plug & Play is
displayed.
Press the ENTER button to select OK.
The Language menu is displayed.
2
Press the ENTER button to enter the
language. Press the … or † button to
select language, then press the ENTER
button.
3
Press the ENTER button to select OK.
The menu to select signal source is
displayed.
Continued...
• The Language menu will automatically
appear after several seconds, even if
the ENTER button is not pressed.
Start Plug & Play.
Plug & Play
Enter Exit
OK
Check antenna input.
Plug & Play
Enter Skip
OK
Plug & Play
Language
Enter SkipMove
English
Español
Português
• The message “Check antenna input”
will automatically appear after several
seconds, even if the ENTER button is
not pressed.
BP68-00588F-00Eng(026~047) 5/17/06 9:43 AM Page 26