Filter
Top Products
English - 23
Connecting to DVI (Digital Visual Interface)
1
Connect a set of audio
cables between the DVI
AUDIO (L, R) IN jacks on the
TV and the AUDIO OUT
jacks on the Set-Top Box.
2
Connect an HDMI/DVI cable
between the HDMI/DVI IN
jack on the TV and the DVI
OUT jack on the Set-Top Box.
NOTES
• Make sure the DVI source’s
power is on, or you will be
unable to select it in the
TV menu's source list.
• The HDMI/DVI IN jack is not
compatible with PC.
• Please be sure to match the
color coded input terminals
and cable jacks.
Connecting to an Analog Amplifier
1
The AV OUT (AUDIO L/R)
jacks cannot be used for
external speakers.
You must hook them up to an
amplifier.
NOTE
•When an audio amplifier is
connected to the AV OUT
(AUDIO L/R) jacks:
Decrease the gain (volume)
of the TV, and adjust the
volume level with the volume
control audio amplifier.
• If using the HDMI/DVI, PC, or
Component input on the TV, the
audio output signal is available
only when the TV’s Internal Mute
is set to on.
(Refer to page 76)
TV Rear Panel
DTV Set-Top Box
Incoming
Cable or
Antenna
1
2
TV Rear Panel
Amplifier
1
BP68-00588F-00Eng(016~025) 6/7/06 11:17 AM Page 23