Filter
Top Products
9
User’s Guide
8
4) MON
This is used when selecting the output channel of the Matrix Switcher.
It is used to select an address number in the Multiplex control mode.
5) Joy Stick
This is used when the actions of the Pan/Tilt connected to the
Samsung Dome Camera or the Receiver Unit is moved UP, DOWN,
LEFT, or RIGHT.
It is equivalent to “MOVE ( , , , )” button in the Multiplex
control mode.
6) CLOSE/OPEN, NEAR/FAR, and TELE/WIDE
This is used when controlling the actions of the IRIS, FOCUS, and
ZOOM of the zoom lens connected to the Samsung Dome Camera or
the Receiver Unit.
7) MENU
This is used when entering or coming out of the set-up mode for
various types of set-ups. When you enter the set-up mode LED gets
turned on, and when you come out LED gets turned off.
It is equivalent to “MENU” button in the Multiplex control mode.
8) PRESET
This is used when searching for the PRESET position set up in the
Samsung Dome Camera or the Receiver Unit. When the preset is in
the selection mode LED gets turned on, and when you come out of the
selection mode LED gets turned off.
9) PATTERN
This is used when executing the PATTERN mode set up in the
Samsung Dome Camera. When you select the PATTERN mode, LED
gets turned on and when you come out LED gets turned off.
10) SCAN
This is used when consecutively scanning the PRESET set up in the
Samsung Dome Camera. When the scan mode is selected, LED gets
turned on and when you come out LED gets turned off.
2.
Names and Functions of Each Parts
1) LCD
This indicates the action state of the System Controller.
2) 0~9
The Camera is used when designating the Monitor Number, PRESET,
and the PATTERN Number. 2 to 4 to 6 to 8 is used when moving an
item in the Menu set-up mode or when changing the set-up value.
It is used when you need to input the address number or camera select
in the Multiplex control mode. Then you press the “ENTER” button
after selecting one.
3) CAM
This is used when selecting the address number of the Samsung Dome
Camera or the receiver unit, and the input channel of the address
number.
It is switched to the Camera control mode when you press the button in
the Multiplex control mode.
SAMSUNG
→
→
→
→
SSC-1000 (gb) 2009.1.8 1:38 PM Page 8