Filter
Top Products
Changing the Preset Station Table
Setting the DVD-VCR Output Channel
Selecting the RF OUT Sound Mode (B/G-D/K)
22 23
GB GB
You can rearrange the Station Table and give different
programme numbers to the stations listed according to your own
preferences.
1 After pressing the MENU, press the OK or
❿ .
Result: The Setup menu is displayed.
2 Press the corresponding
,
❷
buttons to select the Install
option.
3 Press the OK or
❿
buttons to select this option.
Result
: The Install menu is displayed.
4 Press the corresponding
or
❷
buttons, until the Manual
Setup option is selected.
5 Press the OK or
❿
button to select this option.
Result
: The TV STATION TABLE menu is displayed.
6 Press the corresponding
or
❷
buttons, until the required
preset TV programme is selected.
Result
: The selected station is displayed at the same time on
the television screen.
7 To change the programme number assigned to a station press
the OK button on the remote control. (For example, To move a
TV station in programme 1 to programme 3)
8 Press the
or
❷
buttons to select required position.
And then press OK again to swap the position.
9 On completion, press the RETURN button four times to exit the
menu.
VCR
VCR
VCR
Language : English
User Set
Auto Power Off : Off
Screen Messages : On
Install
Your DVD-VCR output channel may need to be changed if the
pictures suffer from interference or if your TV cannot find the
pictures.
Also, you can change the DVD-VCR output channel to adjust the
frequency in which information is displayed on the screen.
1 After pressing the MENU, press the OK or
❿
.
Result
: The Setup menu is displayed.
2 Press the corresponding
,
❷
buttons to select the Install
option.
3 Press the OK or
❿
to select this option.
Result
: The Install menu is displayed.
4 Press the
or
❷
buttons, until the VCR Output CH option
is selected.
5 Select the required output channel (CH21~CH69) by pressing
the OK or
❿
buttons.
CH21 .. CH36 .. CH69
6 On completion, press RETURN to exit the menu.
Then tune your television again (see page 14).
Auto Setup
Manual Setup
TV System : K
VCR Output CH : CH 36
Install
Language : English
User Set
Auto Power Off : Off
Screen Messages : On
Install
Language : English
User Set
Auto Power Off : Off
Screen Messages : On
Install
CH:21
:
CH:36
:
CH:69
Clock Set
Auto Setup
Manual Setup
TV System : K
VCR Output CH : CH 60
Install
Auto Setup
Manual Setup
Install
TV System : K
VCR Output CH : CH 36
Auto Setup
Manual Setup
Install
TV System : K
VCR Output CH : CH 36
PR CH NAME DEC
1 21
2
3
4
5
- - - -
TV STATION TABLE
SWAPPING : OK
DELETE : CLEAR RETURN
PR CH NAME DEC
1
2
3 21
4
5
- - - -
TV STATION TABLE
SWAPPING : OK
DELETE : CLEAR RETURN
You can choose the sound mode (B/G or D/K) according to the
TV set connected to your VCR.
1 After pressing the MENU, press the OK or
❿
.
Result
: The Setup menu is displayed.
2 Press the corresponding
,
❷
or
➛
,
❿
buttons to select the
Install option.
3 Press the OK or
❿
to select this option.
Result
:The Install menu is displayed.
4 Press the OK or
❷
buttons, until the TV System option is
selected.
5
Press the
OK or
❿
buttons to select G or K.
6 On completion, press RETURN to exit the menu.
K
G
00278A SV-DVD540/EUR-GB2 9/9/03 9:51 AM Page 22