Filter
Top Products
Using the Tape Counter
Searching for a Specific Sequence
40 41
GB GB
VCR
Intro Scan
1 After pressing the SEARCH, press the corresponding
or
❷
buttons, until the Intro Scan option is selected.
2 Press the OK or
❿.
3 Press the
➛➛
or
❿❿
buttons depending on the direction
where your desired programme is located.
4 When an Index mark is found the DVD-VCR will playback the
tape for 5 seconds, after which it will continue searching for the
next Index mark.
5 If you want to watch the tape from a particular Index, simply
press
❿
II
.
Index Skip Search:
This feature will enable you to fast forward/rewind to a specific
point on a tape: E.g. if you have recorded 3 different
programmes on a tape and you have rewound the tape to the
beginning, by using this feature you can go directly to the start of
programme 2 simply by pressing the SEARCH button.
1 After pressing the SEARCH, press the corresponding
or
❷
buttons, until the Intro Scan option is selected.
2 Press the OK or
❿.
3 Press the
➛➛
or
❿❿
buttons twice more. This will take
you directly to the start of the desired programme is located.
4 These Index searches can be made forwards: (press
❿❿
) or
backwards: (press
➛➛
). (
➛➛
-20
● ●
0
● ●
+20
❿❿✌
5
To cancel an Index search simply press the
❿
II
or
■
button.
3
3
VCR
The tape counter:
◆ Indicates the elapsed time in the play and record
modes (hours, minutes and seconds)
◆ Is reset when a cassette is inserted in the DVD-VCR
◆ Allows you to find the beginning of a sequence easily
☛ If the remaining time is to be calculated correctly, you
must indicate the type of cassette being used.
1 Insert a cassette in your DVD-VCR.
2 To set the tape counter to zero at the beginning of a sequence:
◆ Press INFO. twice to display the counter
◆ Press CLEAR when you want to set the tape counter to
zero
3 When you are ready,
◆ Start playback or Recording.
◆ Press the
■
button.
◆ To fast-froward or rewind to the sequence at which the
counter was set to zero, press
➛➛
or
❿❿
.
➢ Some DVD-VCR information, such as the counter, can
be displayed on the television screen (unless you have
deactivated the Screen messages mode; refer to page 27).
Press INFO.:
◆ Once to display the current function, programme
number, recording speed, date, time and counter
◆ Twice to display the counter only
◆ Three times to display the time remaining on the
cassette
◆ Four times to clear the display
0:00:00
2
INTRO SCAN :
INDEX SEARCH : - 6
00278A SV-DVD540/EUR-GB2 9/9/03 9:51 AM Page 40