Filter
Top Products
User Manual
59
6.5.1 Program Setup
Using the [Program] menu, you can set up a program to use for both Manual & Event and
Schedule & Event. You can adjust the frame rate, video quality and resolution of the program.
Two choices are available: 1) Select a program by the frame rate, quality, and resolution, or 2)
Set up a program manually. For Event Recording, you can select a frame rate up to the
maximum possible for one channel. When events occur simultaneously in more than two
channels, the recording frame rate may be automatically adjusted.
Program
Under the Program menu, a total of 26 programs labeled from A to Z are available for you to define
with the recording resolution and quality for each channel. For more information about the setting
values of the Program menu, please refer to section 3.5.
Ch (Channel)
Indicates a channel number.
R (Resolution)
Indicates the recording resolution. A total of three types are available: D1 (704x480), Half D1 (704x240),
and CIF (352x240).
F (fps)
Indicates frames per second: from 1 to 30fps. The maximum frame rate may vary depending on
settings.