Filter
Top Products
User Manual
65
When you set the region of time, you may not include the existing time that
is set previously.
Record Setting
Repeat Record Mode
When there is no more space for recording to hard disk, recorded data is removed from the
foremost portion automatically.
Warning Level
This checks the capacity of all disks connected to the DVR and gives a warning when the
specified level is met.
Recorded Data Retention
This shows videos recorded only on specified dates in hard disk.
For example, if the entire video is recorded for 10 days (Drawing 1) and only 2-day recording
(Drawing 2) is specified for playback, only the 2-day recording is available for playback.
Playback Deinterlace
This turns playback deinterlace on or off.
This is available only when the recording resolution is set to Full D1. If this is set to On, imaging
shaking decreases while Full D1 video is paused.
6.5.3 Evnet Record Setup
This menu item is used to record video based on events. To use Event Recording, select a
resolution, frame rate, and quality from the available 26 programs.
Event recording is divided into recording by sensor, by motion detection, by text and by digital
input. In the Programs settings, select a program first. If you want to adjust the details of a
program, select the program and then adjust the resolution, frame rate, and quality. (For more
information, please refer to section 6.6.1 on Program Settings.)