Filter
Top Products
User Manual
93
Copying System Log
System logs are saved as txt-formatted files, and can be saved to a USB flash drive.
To save system logs to a USB drive, insert the drive into a USB port, open the System Log list.
And then press the "COPY" button on the front.
The data will be saved as "Model Name_System Log_Date&Time.txt."
Time
This is used to set the time zone, date format, and time for the DVR.
Daylight Saving needs to be set depending upon the region.
I-Frame Duration
An I-frame duration is the interval between I-frames and is measured by the video frame rate.
For video recordings with less motion, I-frame duration enhances the video quality.
You should only set I-frame duration settings to anything other than Auto if you are specialized
in MPEG-4.
6.9.2 Disk
This section describes how to add, remove, or format internal and external hard disks.