Filter
Top Products
20
MENU
19
SETTING MENU1
– CHECKING POWER FAILURE TIME AND DATE.
• When 5 program is set in the PROGRAM SETUP 1, select
PROGRAM SETUP 2.
• Use the same method for setting PROGRAM REC as in the
PROGRAM SETUP 1.
* When finished with PROGRAM SETUP 1, 2 press MENU to
end and press TIMER to begin standby.
* The tape will be ejected and the beeper will sound if the tape
safety tab has been removed.
6
PROGRAM SETUP 2
•
Displays the memorized time of a power failure and power restore.
* example) If there was a power failure on 17:30:30 12. 23. 2002,
and a power restore on 17:40:00 12. 23. 2002.
(17:30:30= 17 Hours 30 minutes 30 seconds)
* example) If there was a power failure on 13:25:00 12. 24. 2002
and a power restore on 13:26:00 12. 24. 2002,
repeatedly.
1. OFF 2002 12/24 13:25:00
ON 2002 12/24 13:26:00
2. OFF 2002 12/23 17:30:30
ON 2002 12/23 17:40:30
3. OFF
ON
• The screen displays the three most recent events.
The most recent power failure is listed first.
7
POWER LOSS MEMORY
REC
C.MEMO
REC
POWER
• How to set a PROGRAM REC
example) To set up a programmed recording
from 13:03 to 13:15 on Monday in
the L3H mode.
1. Press the SHIFT
❷❷
button to move the cursor
to the vacant program position.
2. Press the SHIFT
❿❿!
button to display the
current time.
3. Press the TRACKING
/
SET "+" or "–" buttons to
set the hour of the starting time.
4. Press the SHIFT
❿❿!
button to move to the
minute.
5. Press the TRACKING
/
SET "+" or "–" buttons to
set the minute of the starting time.
6. By the same methode, set up the ending time
and move to the date.
7. Press the TRACKING
/
SET "+" or "–" buttons to
set monday and press SHIFT
❿❿!
button.
8. Press the TRACKING
/
SET "+" or "–" buttons to
set L3H and press SHIFT
❿❿!
button.
9. By the same method, set up the NEXT
PROGRAM REC which you may want.
• DAILY : The programmed recording is made at
the same time every day.
5
PROGRAM SETUP 1
– SETTING PROGRAM REC
1. You can use only the POWER or RESET
buttons during PROGRAM REC.
2. During a PROGRAM REC, to
cancel the recording press the POWER
button.
3. To cancel a PROGRAM REC, select the
event and press CLEAR button to
display "OFF".
Pressing the SHIFT
❿❿!
button again in
the OFF position to toggles the time set
before.
CAUTION
You can set up to 10 programs a week
REFERENCE
PROGRAM SETUP1
START STOP DATE MODE
•
❿
13:03
→
13:15 MON L3H
•
13:03
→
13:15 DAILY L24H
•
•
OFF
•
13:03
→
13:15 MON L12H
•
PROGRAM SETUP2
(
❷
❿
/–+,CLEAR) END:MENU
PROGRAM SETUP2
START STOP DATE MODE
•
❿
•
•
•
•
•
PROGRAM SETUP1
(
❷
❿
/–+,CLEAR) END:MENU
POWER LOSS MEMORY
YEAR DATE TIME
•
OFF 2002 12/25 15:00:00
ON 2002 12/25 15:15:37
•
OFF 2002 12/24 13:25:00
ON 2002 12/24 13:26:00
•
OFF 2002 12/23 17:30:30
ON 2002 12/23 17:40:00
END:MENU
TIMER
01671A SVR-24JP/960JP-E2 12/7/01 4:06 PM Page 20