Filter
Top Products
28
RECORD LOCKING
This unit features a recording safety function and other various recording
functions for multi-purpose applications including monitoring and
observation. You should familiarize yourself with its operation.
RECORDING
27
Condensation
• If the video is moved from a cool to a warm place suddenly, installed in a humid place or exposed to cold
air from an air conditioner, water drops may be generated on the video head due to the abrupt change in
temperature.
Using the video in this state may cause a malfunction in this product or the tape.
If the video is moved from a cool to a warm place, plug the power cord in, press the power button and
maintain the ON state for 1~2 hours before using.
REFERENCE
Selecting
method
Operating
method
Description of
operation
When you want to
secure recording
• Press the REC LOCK
button to set "REC
LOCK"
• Press the REC LOCK
button again.
• Pressing the REC LOCK button to
begin REC LOCK mode.
REC LOCK lamp will be on.
• No buttons can be entered in the
REC LOCK mode except the
RESET button.
• The recording continues even
after the power restore.
• REC LOCK lamp will be off.
REC LOCK
OFF
REC LOCK
OFF
Operations when the tape ends during recording
* Repeat record after automatic rewind.
• When REPEAT ON is selected on the menu (However, when even one alarm recording is
made the VCR will eject the tape and power on).
* Power on after tape is ejected
• When reaching the end of tape except repeat recording after automatic rewind.
RECORDING
Set before Recording
Check to make sure of
current time
• For program recording current time must be
correct.
• If you have not set the current time yet, refer
to the section on setting time and date
(Refer to 13 page).
Is the record safety tab on
the tape in place?
With the tab in place
• The tape can be recorded over
again.
Prevention tab
Without the tab in place
• The tape cannot be recorded
over unless the tab is replaced by
a piece of scotch tape.
Scotch tape
01671A SVR-24JP/960JP-E3 12/7/01 4:06 PM Page 28