Filter
Top Products
16
MENU
15
SETTING CURRENT TIME
– HOW TO SET THE CURRENT TIME
9
Press the SHIFT
❷!
button.
•
CLOCK SET/ADJUST starts.
SHIFT
V-LOCK
CLOCK SET/ADJUST
1 SUMMER TIME SET (USE)
2 DISPLAY MODE (YY-MM-DD)
3
❿
CLOCK SET/ADJUST
YEAR DATE TIME
2001 01/01 MON 12:00
$
(
❷
❿
/–+) END:MENU
10
Set the year, month and
day using the TRACKING/
SET buttons.
(In case DISPLAY MODE is YY-MM-DD)
• When pressing TRACKING/SET
button once, “2002” is set.
• Press the SHIFT
❿❿!
button after
setting the year, then
$
sign will
place under the month.
•
The month works in the same way.
11
Set the hour and minute
using the TRACKING/SET
buttons.
•
When pressing TRACKING/SET
button, “13” is set.
• Press the SHIFT
❿❿!
button to place
the
$
sign under the minute.
• The minute works in the same way.
TRACKING/SET
TRACKING/SET
CLOCK SET/ADJUST
1 SUMMER TIME SET (USE)
2 DISPLAY MODE (YY-MM-DD)
3
❿
CLOCK SET/ADJUST
YEAR DATE TIME
2002 12/25 WED 12:00
$
(
❷
❿
/–+) END:MENU
CLOCK SET/ADJUST
1 SUMMER TIME SET (USE)
2 DISPLAY MODE (YY-MM-DD)
3
❿
CLOCK SET/ADJUST
YEAR DATE TIME
2002 12/25 WED 13:30
$
(
❷
❿
/–+) END:MENU
12
Press the MENU button
twice.
•
Check the year, month, day and
hour again and press the MENU
button twice.
MENU
2002-12-25
WED
13:30:00
L3 H
Time display
• There is no display of a.m or p.m.
• 1:00 p.m is displayed as 13:00, 11:00 p.m as
23:00 and 12:00 p.m. as 00:00 respectively.
REFERENCE
SETTING MENU
* MODE: Select ALARM REC speed.
Select L3H, L12H, L24H. (L8H is not
available).
OFF: This unit does not Alarm REC
whether Alarm signal comes in or not.
• DURATION: Set ALARM REC time.
AUTO
SEL 3MIN
TAPE END
• To set ALARM REC time.
Adjust the time from SEL 20SEC to
5 MIN using the "set +/–" buttons.
• AUTO: If an alarm signal is received,
ALARM REC will begin and continue
until the alarm signal is interrupted. The
ALARM REC will then stop (It will not
be cancelled within 1 minute).
• TAPE END: If an alarm signal is
received, ALARM REC will begin and
continue to the end of the tape.
• BUZZER: Selects if the beeper sound is on or off
during ALARM REC.
• ALARM RECALL: Check Alarm recording.
(Refer to 33 page)
2
ALARM REC SETUP
* To set ALARM REC in L3H
mode for 5 minutes.
1. Place the "
❿
" sign in the
"DURATION" position using
the SHIFT
❷❷!
button.
2. With each press of the SHIFT
❿❿
button the display changes "SEL
3 MIN".
3. Select "SEL 5 MIN" using the
SET "+" button.
4. Press the MENU button.
• DATE: Select date display ON/OFF
2002-12-25
WED
12:45:30
L3H
12:45:30
L3H
• TIME: Select time display ON/OFF
2002-12-25
WED
2002-12-25
WED
12:45:30
L3H
• POSITION: Select position of date & time on
the screen.
1
DISPLAY MODE SETUP
– SETTING DISPLAY AND ALARM REC
(example)
* To turn the time on or off
1. Place the "
❿
" Sign in the
"TIME DISPLAY" position using the
SHIFT
❷❷
button.
2. Press the SHIFT
❿❿!
button to toggle
the time ON and OFF.
(The DATE and POSITION
work in the same way.)
ON OFF
ON OFF
DISPLAY MODE SETUP
1
❿
DATE DISPLAY------------------(ON)
2 TIME DISPLAY-------------------(ON)
3 POSITION -------------(R-BOTTOM)
(
❷
❿
) END:MENU
ALARM REC SETUP/RECALL
1
❿
MODE----------------------------- (L3H)
2 DURATION--------------------(AUTO)
3 BUZZER ---------------------------(ON)
4 ALARM RECALL
(
❷
❿
/–+) END:MENU
L-UPPER
2002-12-25
WED
9:16:14
L3H
2002-12-25
WED
9:16:14
L3H
2002-12-25
WED
9:16:14
L3H
2002-12-25
WED
9:16:14
L3H
R-UPPER
L-BOTTOM
R-BOTTOM
01671A SVR-24JP/960JP-E2 12/7/01 4:06 PM Page 16