Common Interface
✎
Availability depends on the specific model and area.
Broadcasting → Common Interface
• CI Menu
Enables the user to select from the CAM-provided menu. Select the CI menu based on the menu PC Card.
• CAM video transcoding
You can configure the setting to transcode the video codec from the CAM automatically. Turn it Off if you do not
want to use it.
✎
You must use a CAM that supports video codec transcoding.
• Application Info
View information about the CAM inserted into the CI slot and about the “CI or CI+ CARD” inserted into the CAM.
You can install the CAM any time, with or without the TV turned on.
1.
Purchase a CI CAM module at your nearest dealer or by phone.
2.
Firmly insert the “CI or CI+ CARD” into the CAM in the direction of the arrow.
3.
Insert the CAM with the “CI or CI+ CARD” into the common interface slot, in the direction of the arrow so that it
aligns parallel with the slot.
4.
Check if you can see a picture on a scrambled signal channel.
English - 96 English - 97
Preference Features