Filter
Top Products
Connecting to a Wireless Internet Network Manually
Network → Network Settings
With networks that require a static IP address, you will need to enter the IP address, subnet mask, gateway and DNS
values manually to connect to the network. To get the IP address, subnet mask, gateway and DNS values, contact your
Internet Service Provider (ISP).
✎
Refer to the "Dynamic versus Static IP Addresses" section for more information on dynamic IP and static IP
addresses.
1.
Setting the Network Type to Wireless automatically displays a list of available wireless networks.
Network Settings
Select your network type.
Network Type Wireless
Wireless network
AP0000
You can connect your TV to the
internet. Please select which wireless
network to use.
AP0001
Add Network
Refresh WPS(PBC)
2.
Select the network (SSID) you want to connect to. If the wireless router doesn't appear in the list, select Add
Network, and enter the network's SSID manually.
3.
Enter the security key and select OK. If the selected network is not security-enabled, the TV attempts to connect
right away.
4.
Select Stop when the TV attempts to connect to the network. Once the network connection has been interrupted,
select IP Settings.
English - 40 English - 41
Basic Features