Filter
Top Products
YOUR NEW TV
English - 11
Connection Jacks (Rear)
Use the rear panel jacks to connect an A/V component that will be connected
continuously, such as a VCR or a DVD player.
For more information on connecting equipment, see pages 14 – 24.
Œ
Digital Audio Output jack
(OPTICAL)
Connect to a Digital Audio component.
´
HDMI
(High Definition Multimedia Interface)
Input jacks
Connect to the HDMI jack for device with HDMI
output.
ˇ
Video Input jacks
Connect to the video output jacks of VCRs, DVD
players and similar devices.
• The Y Component video 1 and 2 input jacks also
function as the regular (composite) video 2
and 3 input jacks.
¨
Audio Input jacks
Connect to the audio output jacks of VCRs, DVD
players and similar devices.
• The component audio 1 and 2 input jacks also
function as the audio 2 and 3 input jacks for
regular (composite) video.
ˆ
Audio-Video Output jacks
Connect to the audio/video input jacks of a
recording VCR.
Ø
S-Video Input jack
Connect to S-Video output jack of an S-VHS VCR
or DVD player.
∏
Component Input jacks
(Y, P
B
, P
R
, AUDIO-L/R)
Connect to the Component audio and video
outputs of DVD or DTV set-top box.
480i/480p/720p/1080i Y, PB, and PR video signal
inputs are available.
”
UPGRADE PORT
For service only
’
ANTENNA terminals
Two independent cables or antennas can be
connected to these terminals. Use “ANT 1 IN (Air)”
and “ANT 2 IN (Cable)” terminals to receive a
signal from VHF/UHF antennas or your cable
system.
AA68-03652A-00Eng 5/30/05 9:38 AM Page 11