Filter
Top Products
OPERATION
English - 26
OPERATION
Chapter Three
OPERATION
Turning the TV On and Off
Press the POWER button.
You can also use the POWER button on the front panel.
Plug & Play Feature
When the TV is initially powered On, basic customer settings proceed automatically
and subsequently: Setting the language, Antenna input check, Channel Memorize and
Time Setting.
• The Plug & Play function operates after plugging in the TV for the first time.
1
Press the POWER button on
the remote control.
The message “Menu
language, Channels,
and Time will be set ” is
displayed.
Press the ENTER button, then “Select the language of the OSD” is
displayed.
2
Press the ENTER button to
enter the language.
Press the … or † button to
select language, then
the ENTER button.
“Select the antennas to
memorize” is displayed.
3
Press the … or † button
to memorize the channels
of the selected
connection.
Press the
ENTER button to
select “Start”.
When selecting Cable TV :
Press the … or † button
to select “Cable”, then
press the ENTER button.
Press the … or † button
to select “STD”, “HRC”,
or “IRC”, then press the
ENTER button.
continued...
Select the antennas to memorize
Air
Cable
Air + Cable
Start
Start
Start
Select the cable system
STD
HRC
IRC
Select the language of the OSD
Language :
English
Spanish
French
Menu language, Channels,
and Time will be set
Start
Plug & Play
Plug & Play
Plug & Play
œ Plug & Play feature doesn’t
work in the AV mode.
Selects English as the menu language.
Selects Air to execute the Auto Program function.
Selects STD as a signal type for your location.
œ STD, HRC, and IRC
identify various types of
cable TV systems. Contact
your local cable company
to identify the type of cable
system that exists in your
particular area.
AA68-03652A-00Eng 5/30/05 9:38 AM Page 26