Filter
Top Products
Choosing a IVlulti-Channel Sound (MTS) Track =Analog
1 Press the MENU button to display the menu.
Press the A or T button to select Sound, then press the ENTER button.
2 Press the A or _' button to select Multi-Track Options.
3 Press the ENTER buttonto select Multi-Track Sound.
4 Press the _, or _' button to select a setting you want, then press the ENTER button.
Press the EXIT button to exit.
,, Choose Mono for channels that are b[oadcasting in moao, Or if YOUare having difficulty
receiving a stereo signal.
* Choose Stereo for channels that are broadcasting in stereo, r-----_...... r................. T......
_ Ch°ose SAP to listen to the Separate Audi° pr°gram' which is usuatlYa f°reign' II "_" IIiill
lannuane translation = I[ pMODE SMO[IE PI £STREN TH
I AUTO PROG ADD/D L M1£ _'_.
r-_ Pressthe MTS button on the remote control repeatedly to select Mono, Stereo, orSAP, i II _ _ _"_,_ieq
t._MJ L___JJ._ ..... -J
Clearing Scrambled Channels =Digital
The Clear Scrambled Channel function is used to filter out scrambled channels after Auto
Program is completed. It removes the scrambled channels from the list by tuning the
digital cable channels. This process may take up to 20-30 minutes.
1 Press the MENU button to display the menu.
Press the A or _r button to select Channel, then press the ENTER button.
2 Press the A or _' button to select Clear Scrambled Channel, then press the ENTER
button, It searches scrambled channels, which are to be removed from the list.
To stop searching scrambled channels;
Press the ENTER buttonto select Stop.
Press the _ button to select Yes, then press the ENTER button.
3 Whenthe scrambled channel searching is completed, press the ENTER button.
Press the EXIT button to exit.
Adding and Erasing Channels
You can add or delete a channel to display the channels you want.
To use the Channel List function, first run Auto Program (see page 11).
1 Press the MENU button to display the menu.
Press the _. or V button to select Channel, then press the ENTER button.
2 Press the A or T button to select Channel List, then press the ENTER button.
3 Press the ENTER buttonto select All.
4 Press the A/T/4/_- buttonto select a channel to delete, then press the ENTER button.
Press the A or _' button to select Delete, then press the ENTER button to delete the
channel. The "_" symbol disappears. Press the RETURN button to go back.
5 Press the A/T/4/_ buttonto select a channel to add,then press the ENTER button.
Press the A or V button to select Add, then press the ENTER buttonto addthe channel.
Press the EXIT button to exit.
All added channels will be shown on Added menu.
* Red button! Press repeated y t0 SelectAll, Added, or Favorite:
*, Green button: Press to addall channels deleted.
_. Yellow button: Press to delete all channels memorized:
_ ress the ADD/DEL button on the remote control. Press the CH _. and CH V button to
setect the channel to beadded or deteted, then press the ENTER button.