Filter
Top Products
Viewing the Connection Panel
Usethe rear panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players.
Rear of the TV Side of the TV
TX-T2791 H/TX-T3091WH
O m I
O_.......l i_il;!¸O
O o=lB|lm.........
O
f--1
oo o
TX-T2793H/TX-T3092WH/TX-T3093WH
O ANT IN
Connect to an antenna(air) or cable TV system.
O AVlN I/AVIN 2
Video and audio inputsfor external devices, such asa
camcorder or VCR
O AV OUT
Connect to the audio/video input jacks of a recording VCR
0 COMPONENT IN 1, 2
Connect Component video/audio.
DIGITAL AUDIO OUT (OPTICAL)
Connect to a DigitalAudio component.
0 HDMI IN 2 (TX-T2793H/TX-T3092WH/TX-T3093WH only)
Connect to the HDMIjack of adevice with HDMI output.
UPGRADE PORT (USB)
Connect for service and software upgrade.
O
HDMI/DVI IN (TX-T2791H/TX-T3091WH)
HDMII/DVI IN (TX-T2793H/TX-T3092WH/TX-T3093WH)
- Connect to the HDMI jack of a device with HDMI output.
These inputs can also be used as a DVI connection with
separate analog audio inputs.
An optional HDMI/DVl cable witl be necessary to make this
connection. When usingthe optionat HDMI/DVI adapter, the
DVI analog audio inputs on your TV allow youto receive left
and right audio from your DVI device.
(HDMI/DVl connection to a computer is not possible.
This TV cannot be used as a Monitor with your PC.)
- When connecting this product via HDMI or DVI to a Set Top
Box, DVD Player or Games Console etc, make sure that it
has been set to a compatible video output mode as shown
in the table below. Failure to observe this may result in
picture distortion, image breakup or no picture.
- Do not attempt to connect the HDMI/DVI connector to a PC
or Laptop Graphics Card. (This wilt result in a blank screen
being displayed)
DVI IN/AUDIO L/R
DVI audio outputs for external devices.
_orted modes for HDMt/DVl and Com_
(o = supported,X= notsupported)
480i 480p 720p 1080i
HDMI_DV160Hz X O O O
Component O O O O
0 S-VIDEO IN
Connect an S-Video signal from a camcorder or video game.