Filter
Top Products
Setting the Blue Screen Mode
If no signal is being received or the signal isvery weak, a blue screen automatically
replaces the noisy picture background.
If you wish to continue viewing the poor picture, you must set the "Blue Screen" mode to
"Off".
1 Press the MENU button to display the menu.
Press the A or _' button to select Setup, then press the ENTER button.
2 Press the A or _' button to select Blue Screen, then press the ENTER button.
Press the A or _' button to select On or Off, then press the ENTER button.
Press the EXIT button to exit.
Adjusting the Melody Sound
The TV power on/off melody sound can be adjusted.
1 Press the MENU button to display the menu.
Press the A or T button to setectSetup, then press the ENTER button.
2 Press the A or V' button to setect Melody, then press the ENTER button.
3 Press the A or _' button to select Off, Low, Medium, or High, then press the ENTER
button.
Press the EXIT button to exit.
DD _ Manufacturedunder license from Dolby Laboratories. D0!bYandthe doubte:D
i e I "[A L symbol are trademarks of DoIby Laboratories.
Setting the HDMI Black Level
Use this function when the screen is too dim in the HDMI mode. (by HDMI input for the
RGB limited range of 16 to 235)
1 Press the MENU button to display the menu.
Press the A or T button to select Setup, then press the ENTER button.
2 Press the A or T button to select NDMI Black Level, then press the ENTER button.
3 Press the A or _' button to select Normal or Low, then press the ENTER button.
Press the EXIT button to exit.
This function is active only when the externel input connects to HDMI(RGB signals).
Setting the Film Mode
Film mode automatically senses and processes film signals from all sources and adjust
the picture for optimum quality.
_,_ Film mode issupported in480i only.
1 Press the MENU button to display the menu.
Press the A or _' button to seIectSetup, then press the ENTER button.
2 Press the A or _' button to select Film Mode, then press the ENTER button.
3 Press the _, or T button to select Off or On, then press the ENTER button.
Press the EXIT button to exit.