Filter
Top Products
To Select the Source
Useto select TV or other external input sources such as DVD players, VCRs, etc.
connected to the TV.
1 Press the MENU button to display the menu.
Press the A or _r button to select Input, then press the ENTER button.
2 Press the ENTER buttonto select Source List.
Press the A or T button to select signal source, then press the ENTER button,
You can choose between the following sets of jacks: TV,AV1, Component1,
Component2, HDMI or HDMI1,2 (depending on the model) on the TV's rearpanel and
AV2 or S-Video onthe TV's side panel,
_ Pressthe SOURCE button on the remote control to view an external signal source,
HDMI wilt appear in the Source list for models TX-T2791H and TX-T3091WH,
HDMI1/HDMI2 will appear inthe Source list for models TX-T2793H, TX-T3092WH,
and TX-T3093WH
'1
' f SOURCE ,
l , I _ oo sb, / _ l
[.......... ......
To Edit the Input Source Name
Name the external device connected to the inputjacks to make your input source
selection easier.
i
2
3
Press the MENU button to display the menu.
Press the A or _' button to select Input, then press the ENTER button.
Press the A or T button to select Edit Name, then press the ENTER button,
Press the A or T button to select AV1, AV2_S-Video, Component1, Component2,
HDMI (TX-T2791H andTX-T3091WH), or HDMI1, 2 (TX-T2793H, TX-T3092WH, and
TX-T3093WH) input jack, then press the ENTER button,
Press the A or T button to select VCR, DVD, D-VH& Cable ST& HD STB, Satellite STB,
PVR STB, AV Receiver, DVD Receiver, Game, Camcorder, DVD Combo, DVD HDD
Recorder, Internet TV Recv., Interactive TV Recv., VOD STB, or TV inputsource, then press the ENTER button.
Press the EXIT button to exit.
Using Automatic Picture Settings
Your TV has three automatic picture settings ("Dynamic", "Standard", "Movie") that are
preset at the factory.
You can activate a Picture Setting by making a selection from the menu.
1 Press the MENU button to display the menu.
Press the ENTER buttonto select Picture.
2 Press the ENTER buttonto setect Mode.
Press the J, or _' button to select the Dynamic, Standard, or Movie picture setting, then
press the ENTER button.
* Choose Dynamic for viewing the TV during the day or when there is bright light in the .....................................
room. I _ _ _ _ _Tm.................... TF I
, Choose Standard for general TV watching mode. : II _Mo__MOOE_,z _,_,_, _
* Choose Movie when watching movies. ! II _. • _ _ L J _ !
iii AUTQ p_o_V[ : :_ E MTS _Sf_S_ll) i] Ill
r--_ Press the P, MODE button on the remote control to select one of the standard picture i II l_-J ...... Ji_--_ l/ i
settings. - ................
3 Press the A or T button to select Contrast, Brightness, Sharpness, Color, or Tint,
then press the ENTER button.
4 Press the ,1 or I- button to decrease or increase the value of a particular item.
:_ You cannot adjustthe Tint in DTV,Component or HDMI mode.
5 Press the ENTER buttonto return to Mode.
6 Press the A or V' button to select Color Tone, then press the ENTER button.
7 Press the A or T button to select Cool2, Coo11, Normal, Warml, or Warm2, then press
the ENTER button.
:_ When the picture mode is set to Dynamic or Standard, Warml and Warm2 cannot be
selected.
P_ Sett'm sto the Factor Defaults
8 Press the & or T button to select Reset, then press the ENTER button.
Each picture mode can be reset.
Press the EXIT button to exit.