Filter
Top Products
◀ ▶
English
❑❑ Switching❑between❑Anynet+❑Devices❑
1. Press the TOOLS button, select Anynet+❑(HDMI-CEC), and then press
ENTER
E
2. Select Device❑List, and then press the ENTER
E●
button.
If you cannot find a device you want, press the
A
C B D
button to refresh the list.
3. Select a device, and then press the ENTER
E
button. You can switch to the
selected device.
The Device❑List menu appears only when you set Anynet+❑(HDMI-CEC)❑
to On in the System menu.
●
Switching to the selected device may take up to 2 minutes. You
cannot cancel the operation during the switching operation.
●
If you have selected an Anynet+ device by pressing the SOURCE button
and then selecting its input source, you cannot use the Anynet+ function.
You must select and switch to an Anynet+ device by using the Device❑
List for Anynet+ to work.