Filter
Top Products
◀ ▶
English
7. When done, use the
r
button to move the cursor to NEXT, and then press
the ENTER
E
button.
8. The network connection screen appears and the verification process starts.
Press ENTER
E
to cancel. Select IP❑Setting on network connection
screen. The IP❑Settings screen appears.
9. In the top entry field, press ENTER
E
, and then set IP❑Mode to Manual.
10. Press the
▼
button on your remote control to go to the IP❑Address entry
field, and then press ENTER
E
.
11. Enter the first portion of the IP❑Address (for example, 105) into the first entry
field using the number keys on your remote control. Press the right arrow
button to go to the next field.
12. Enter the next portion of the IP❑Address. Press the right arrow button to go
to the next field.