Samsung UN32F5500 Flat Panel Television User Manual


 
90
Auto
Automatically download the correct time from a digital channel. To enable this option, an antenna
cable has to be connected to the TV. The accuracy of the time information received may vary
depending on the channel and signal. Set Clock Mode to Auto.
"
Time Zone and DST may not be supported depending on the country.
DST: Set the DST (Daylight Savings Time).
Time Zone: Choose your time zone.
Time Offset
Screen Menu > System > Time > Clock > Time Offset
Try Now
If the set time is not accurate, users can set the time offset to adjust the time difference hourly from
-12 to +12 hour. Changing Time Offset is only available, when the Time is set to auto, and is set
through a network.
The current time will be set through a network, if the TV fails to receive the time information including
the broadcast signal from TV stations. (ex: Watching TV via set-top box, Satellite receiver, or etc)
Manual
Manually enter the time. Set Clock Mode to Manual and then select Clock Set to enter the current
time and date.
Sleep Timer
Screen Menu > System > Time > Sleep Timer
Try Now
This function automatically shuts off the TV after a preconfigured period of time. You can set the timer
up to 180 minutes in 30 minute increments.