Filter
Top Products
11
● Edit channel list
1. Press the Menu button to select Main Menu.
2. Select Channel List by using the
e
or
d
button. Press the
8
to
enter.
3. Select Lock channels by using the
e
or
d
button. Press the
8
button to enter.
4. To delete channels from this list use
e
or
d
button to highlight a
channel.
5. To lock or unlock parental locked channels, select the channel and
press the yellow button. This will lock or unlock the channel.
6. Press the OK button, selected channels will be locked / unlocked
and parental lock/unlock stored.
You will go back to Channel List menu.
● Scan for channels
1. Press the Menu button to select Main Menu.
2. Select Channel List by using the
e
or
d
button.
3. Press the
d
to select Scan for channels. Press the
8
to enter.
This will scan all available channels. This is a useful function if you
delete channels and want to get them back later.
4. Press the OK button to save (All Channels).
5. Press the OK button again to watch normal TV picture.
✐ Parental lock is still saved after the scan for channels has been
initialised.
In this section a lot of the information will only be useful to a techni-
cian. Some parts are however useful to you. If there is an upgrade in
software you will need this section to upgrade your TV from time to
time.
1. Press the Menu button to select Main Menu.
2. Select Technical Information menu by using the
e
or
d
button.
Press the
8
button to enter.
3. Select Signal information by using the
e
or
d
button and press
the
8
button to enter.
This screen cannot be altered but if you have a problem you may
need to refer to this screen for some data.
4. Press the Return or the OK button to go back to Technical infor-
mation screen.
■ Software upgrade
1. Press the
d
button to select Software Upgrade screen. Press
the
8
button to enter.
This looks for any new software upgrades that maybe transmitted at
any time.
2. Press the Return button to go back to Technical information
screen.
3. Select Product Data by using the
e
or
d
button and press the
8
to enter.
This is useful to service engineers.
4. Press the Return button to go back to Technical information
screen.
5. Press the
d
button to select Reset screen. Press the
8
button to
enter.
If you press Red button to confirm it will return all settings to factory
(default) mode for digital channels. To start a scan for all available
channels switch the TV set Off and On again and press D/A button
to select digital.
When the TV set has been initialised press the OK button to Save
and the OK button to watch TV picture.
Channel List
Lock channels
Channel list
Scan for channels
Lock channels All channels
BBC ONE
BBC ONE
BBC TWO
ITV 1
Channel 4
five
ITV 2
BBC THREE
Teletext
BBC FOUR
Sky Travel
UK History
Ch 14
CH 15
QVC
TV Travel Shop
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
OK
Save
Parental lock
Y
Channels found
The scan will take approximately 3 minutes
In progress
RET
Stop
Scan for channels
0
DIGIT
DIGIT
AL
AL
OPERA
OPERA
TION
TION
Technical Information
Signal information
Technical information
Software upgrade
Product data
Reset
BBC THREE (BBC)
Free
DVB Identifiers (9018,4103,4351)
Channel 63
Signal strength (%) 34
Bit error rate
Uncorrected errors/sec
OK
Select
RET
Cancel
Signal information
Looking for new version.......
RET
Cancel
Software upgrade
Reset receiver configuration?
RET
Cancel
!
Confirm
R
Product LDITPGFTG_01_00
Software1.9.76 build jun 25 2003 16:10:15
Resourse1.26.3
Boot 2.4.0
RET
Cancel
Product data