Filter
Top Products
15
Use the setup category to set the Clock/Day, Digital Audio Output, and Menu Language features. (No settings
required for System Information.) The menu setup feature and options listing will depend on the current
tuner/channel selection (DTV or NTSC) and current signal reception.
SDB Menu Operation—Setup
To set the Clock/ Day manually
1. Press MENU key for on-screen display.
2. Use the / keys to select the Setup category.
3. Use the / keys to highlight the Clock/Day feature.
4. Press the key.
5. Use the / keys to highlight Manual. The on-screen
Clock/Day entry areas appear. Press ENTER.
6. Use the remote 0~9 number keys or / keys to enter
the proper clock time.
7. Use the / keys to highlight AM or PM.
8. Press ENTER to set the time and move the cursor to the Day
Setting entry area.
9. Use the remote 0~9 number keys or / keys to select
the proper day/date. Then press the ENTER key.
Operational Tips:
– Use the left key to clear any incorrect number entry.
– The clock must be set before setting the day/date.
Figure 32—Clock Time
Figure 33—Day [month/day/year]
Figure 34—Banner display with Clock
Time/Day Settings
Figure 31—Setup Category
Digital Audio Output
Use this feature to choose the format of the digital DTV audio output signal: PCM or S/P DIF.
1. Use the / keys to highlight the Digital Audio Output
feature.
2. Press the key.
3. Use the / keys to highlight option: PCM or S/P DIF.
Press the ENTER key.
NOTE: If you are watching an NTSC (analog) channel, “PCM” will
be the only option shown.
Figure 35—Digital Audio Output
QuickTips
■
To see the time of day
and date, press the
DISPLAY key, the
banner information
will appear on screen.
■
The Channel Banner
(Full or Brief) Clock
display will be blank if
the clock/day has not
been set.
■
To use the Auto
Clock/Day feature, a
local PBS station that
is broadcasting an
extended data service
(XDS) signal must be
received. The Auto
Clock/Day searches for
the transmitted signal
and automatically sets
the Clock/Day.
■
If no NTSC channel
signals are found
during the channel
search process, the
SDB will automatically
skip the Automatic
Clock/Day Setup
process.
■
During the Clock/Day
setup procedure, only
the POWER and
DISPLAY keys are
operational.
Need help?
Visit our Web site at
www.sanyoctv.com