Filter
Top Products
22
QuickTips
■
If Caption Text mode is
selected and no
captioned text is
broadcasted, a black
box may appear and
remain on the TV
screen.
To remove this black
box, set captioning to
any mode other than
Text 1 or Text 2 or
press the
RESET
key to cancel caption-
ing and customized
settings.
Need help?
Visit our Web site at
www.sanyoctv.com
Captioning is text transmitted along with the picture and sound so it can be displayed on the screen. Captioning
will depend on the channel tuning system selected and the current broadcaster’s signal received. Closed-
Captioning is received only through the NTSC tuner.
Selecting Captioning:
Press CAPTION key to select desired options:
Local broadcasters decide which caption signals to transmit.
They may not choose to provide captions or may provide
captions in one or all of the available modes.
Caption 1: This is the main mode used for program caption-
ing (words match the program you are watching). Almost all
broadcasters will use Caption 1 to transmit program captions.
These captions are generally one or two lines.
Caption 2: This is an alternative mode for program caption-
ing. Caption 2 may be used by the broadcaster to provide
captions in another language, such as, Spanish or French.
Text 1: This mode is used to display large amounts of text.
This text will appear within a black box that may be nearly
as large as the TV screen. Text displayed in this manner does
not generally relate to the program. These captions may be
used by broadcasters to provide weather reports, community
bulletins, stock quotes, etc.
Text 2: This mode is an alternative mode used to display
large amounts of text. The same types of information
displayed in Text 1 can be displayed in Text 2.
NOTE: This SDB provides standard analog closed-
captioning displays.
Closed-Captioning
Caption OFF → Caption 1 →Caption 2 →Text 1 →Text 2
Figure 61—Caption 1 Mode
Figure 63—Text 1 Mode
Figure 62—Caption 1
Figure 64—Text 1
Care and Cleaning
The surface of the cabinet can be damaged if not properly maintained. Many common household aerosol sprays, cleaning agents,
solvents, and polishes will cause permanent damage to the fine surface.
1. Unplug the power cord before cleaning.
2. Use a dry cloth for cleaning.