Filter
Top Products
-E33-
z /ON
NEXTPREV
FWD SLOWREV SLOW
PAUSE/STEP
PLAY
REV FWD
CLEAR
SEARCH
MODE
123C
456
789
0
4
b
5
a
ENT
SETUP MENU
AUDIO RETURN
PICTURE
MODE
ANGLE
REPLAY
ZOOM ANGLE
LAST MEMO
SURROUND
ON SCREEN
OPEN/CLOSE
REPEAT A-B REPEAT
SUBTITLE
CHANGE
SUBTITLE
ON/OFF
TOP MENU
PROGRAM
/RANDOM
SETUP
ENT
p
o
a
Setting Digital Out
If the optical DIGITAL OUT jack is connected to the amplifier, you
must set as follows:
1. Press [SETUP] in the stop mode.
The setup screen appears.
96kHz LPCM (96kHz Liner Pulse Code Modulation):
If your amplifier is available for 96kHz sampling, select “96kHz
LPCM”. If not, select “48kHz LPCM”.
Notes:
• When “48kHz LPCM” is set, there are 48kHz LPCM audio
signals from the AUDIO OUT jacks, not 96kHz LPCM audio
signals.
• When playing back the DVD video disc which recorded with
96kHz LPCM, there is no digital output.
• But playing back the DVD video disc with no copyright
protection, the sound is original recorded sound.
Dolby Digital:
If your amplifier has Dolby Digital Decoder, select “BitStream”.
If not, select “LPCM”.
DTS:
If your amplifier has DTS Decoder, select “On”. If not, select
“Off”.
MPEG (Moving Picture Expert Group):
If your amplifier has MPEG2 Decoder, select “BitStream”. If not,
select “LPCM”.
Language Display Digital Out Parental
2. Press [a] to select “Digital Out”.
3. Press [ENT].
“Digital Out” screen appears.
Language Display Digital Out Parental
96kHz LPCM
Dolby Digital
DTS
MPEG
48 kHz LPCM
LPCM
Off
LPCM
4. Press [p] or [o] to select the item (highlighted).
5. Press [ENT].
The submenu appears.
Example:
96kHz LPCM
Dolby Digital
DTS
MPEG
48 kHz LPCM
LPCM
Off
LPCM
LPCM
BitStream
6. Press [p] or [o] to select the submenu (highlighted).
Example: To select “Dolby Digital BitStream”
96kHz LPCM
Dolby Digital
DTS
MPEG
48 kHz LPCM
LPCM
Off
LPCM
LPCM
BitStream
7. Press [ENT].
(In this example, “Dolby Digital BitStream” remains.)
8. Repeat steps 4 ~ 7 for other items.
9. Press [o] to skip back to the setup screen (or press [SETUP]).
Need help? Call
1-800-813-3435