Filter
Top Products
14
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
REMOTE CONTROL KEYS (Continued)
Caption Key—Press to select analog or digital
caption. The Analog Caption modes are: CC1, CC2,
Quikcap and OFF. The Digital Caption modes are:
Digital CC1~CC6, Quikcap and OFF. Digital Captions
can also be customized to change the text font
type, size, style, background and edge colors. (See
page 21.)
Note: These feature are operable only when digital
caption service is available.
Guide Keys—Press the following keys to operate
your satellite receiver once the remote is pro-
grammed:
Page/Guide Key—Press to display menu guide.
Up/Down Key—Press Up/Down to move the
cursor within the menu display.
VCR/DVD Keys—These keys control VCR or DVD
functions for Fast Forward (), Rewind (), Play
(), Record (REC), Stop (■), and Pause.
Freeze Key—Press this key to stop the action. Use
this feature to hold an advertised phone number or
address on the screen.
PAP Keys—See page 26 for split-screen Picture-
and-Picture.
15
16
17
18
19
15
16
17
18
19
PROGRAMMING THE REMOTE
CONTROL
1
Find your VCR, Cable Box,
DVD Player, and Satellite
Receiver brand codes in the
charts on pages 15 ~ 16.
2
Press and hold the VCR,
CABLE, DVD, SAT (Satellite
Receiver) or AUX (Auxiliary)
mode key while entering a
three-digit code number.
Then release the mode key.
If the code was accepted, the mode key will flash 5 times
after it is released. If you entered an invalid code, the
mode key will not flash. Check the code number and
repeat Step 2.
After entering each code number check the unit’s opera-
tion by pressing the Power and/or Channel keys. If these
keys operate your equipment, you have probably entered
the correct code number for that device. If not, follow Step
2 and enter another code, if available.
Perform Steps 1 and 2 for each piece of equipment you
have.
The VCR, Cable Box, DVD, and Satellite modes will accept
only each mode’s specific code type.
The AUX mode will accept all code types, but only one
code at a time.
After you have programmed the remote control and con-
firmed its operation, enter your codes in the spaces
provided for easy reference.
NOTES:
– Many of the keys on this remote control are multi-functional.
Please refer to the chart for a generic description of the keys
and their functions. Refer to your original operating manuals for
specific feature operation.
– This remote control cannot add keys or features to your equip-
ment. Your equipment's manufacturer must have originally
provided them.