Filter
Top Products
PROGRAM TIMER RECORDING
NOTES:
œ During timer recording or timer recording stand-by, all
the buttons on the VCR, except the TIMER button and
the buttons to set/cancel the security lock (see page
37), are disabled.
œ If the power fails, the recording will be interrupted.
When the power is restored, the recording will resume
if the stop time has not yet been reached, and “P” will
be displayed on the digital display. The VCR internal
battery is completely recharged after the VCR has
been connected to a live outlet for 48 hours, and it will
maintain all the VCR settings memory for up to 30
days.
œ Set the timer recordings so that the recording times
do not overlap. If they do, the one with the earliest
recording start time will have priority. (See chart
below.)
œ If no timer recording is set or a cassette without
erasure-prevention tab is loaded, when the TIMER
button is pressed the timer recording indicator “n” will
start flashing.
œ If “OFF” is displayed on the digital display, timer
recording is not possible in order to prevent the
recorded tape to be recorded over.
œ If the recording speed mode has been set to “000”,
single image recordings will be made.
Program 1
7:00PM
These portions will
not be recorded
10:00PM8:00PM 9:00PM
Program 2
Program 3
NB4QR/NA (SRT-4040 GB) Tue. Sept., 10/2002
English
31