Filter
Top Products
PROGRAMME TIMER RECORDING
Setting the Holidays
By setting the holidays, timer recording will be conducted
on those days, as set for Sundays.
1
Press the STANDBY/ON button.
2
Press the MENU button to display the MAIN MENU.
3
Turn the JOG dial to select the “8.HOLIDAY SET”
line, then turn the SHUTTLE ring clockwise.
ø The (HOLIDAY SET) menu appears.
<HOLIDAY@SET>
@@1@@-----@@@11@@-----
@@2@@-----@@@12@@-----
@@3@@-----@@@13@@-----
@@4@@-----@@@14@@-----
@@5@@-----@@@15@@-----
@@6@@-----@@@16@@-----
@@7@@-----@@@17@@-----
@@8@@-----@@@18@@-----
@@9@@-----@@@19@@-----
@10@@-----@@@20@@-----
4 Turn the JOG dial to select the desired line, then
turn the SHUTTLE ring clockwise.
5
Turn the JOG dial to set day of the holiday, then turn
the SHUTTLE ring clockwise.
6
Turn the JOG dial to set month of the holiday, then
turn the SHUTTLE ring clockwise.
ø Repeat steps 4 to 6 to set up to 20 holidays.
7
Press the MENU EXIT button.
NOTES:
œ If setting holidays, be sure that a timer recording is set
for Sunday. If not, this function will not operate.
œ If a timer recording for Sundays is entered, the
holidays timer recording will not function if the
programme timer recording mode is set to “N”.
œ If timer recording has been set for 24 hours or more,
after midnight the recording will be carried out
according to the (TIMER SET) menu settings, even if
holiday timer recording has been set.
œ To erase a setting, follow the same procedure as
above, but at step 5 and 6, enter “--” instead of a
setting.
Changing a Programme Timer Recording
1
Follow steps 1 and 2 under “PROGRAMME
TIMER RECORDING” on page 27.
2
Turn the JOG dial until the setting (line) to be
changed is highlighted, then turn the SHUTTLE ring
clockwise.
3
Turn the SHUTTLE ring clockwise, until the setting
to correct is flashing.
4
Turn the JOG dial, to correct the setting.
5
Press the MENU EXIT button, then press the TIMER
button.
To Cancel a Programme Timer
Recording
1
Follow steps 1 and 2 under “PROGRAMME
TIMER RECORDING” on page 27.
2
Turn the JOG dial until the setting (line) to be
canceled is highlighted, then turn the SHUTTLE ring
clockwise.
3
Turn the SHUTTLE ring clockwise, until “Y” is
flashing.
4
Turn the JOG dial, to select “N”.
5
Press the MENU EXIT button, then press the TIMER
button.
To cancel all programme timer
recordings
1
Follow steps 1 and 2 under “PROGRAMME
TIMER RECORDING” on page 27.
2
Press the MENU RESET button.
ø All programmed timer recordings are erased.
3
Press the MENU EXIT button.
RQ4Q/EX (TLS-1960P GB) Wed. May, 08/2002
English
29