6. Basic Operation
6.1 Power ON/OFF
6.2 Selection of Input Mode
The Display is in Standby mode.
- Press the
Standby on the
remote control or on the control
panel to turn on the unit. The
power indicator changes from red
to green.
- Press the
Standby on the
remote control or on the control
panel again to return the display to
standby mode.
The power indicator changes from
green to red.
Note: For protecting your LCD TV
product, the interval time between
turn on the LCD TV product and
shut down it should be kept at
least one minute.
- Press
Source on the remote control
or on the LCD TV control panel to
select the signal source you desired.
When no input from the selected
Source
Standby
signalsource,“Nosignal”willappear,pressSource on the remote control or on
the control panel again to search the next source.
Note:
The LCD-TV will automatically turn itself off after approximately 15 minutes if no
signal input. When no signal is inputted for about 14 minutes. A “No signal and
going to power down” wording will appear.
