Scott LCT37SHA Flat Panel Television User Manual


  Open as PDF
of 53
 
36
Operating Instructions
■ Using the “Channel Skip”
󱌮Press Menu button, and then press
or buttonuntilthe“TV”
menu appears.
󱌰Press
or button to highlight
the item.
󱌲Press
or buttonto“On”or
  “Off”,whenselect“On”thechannel
  isskipped.
󱌴Press
Menu or Exit button to
return.
■ Using the “Channel Name”
󱌮Press Menu button, and then press
or buttonuntilthe“TV”
menu appears.
󱌰Press
or button to highlight
the item.
󱌲Press
Enter button to confirm, it
  willdisplay“ChannelName”list.
󱌴Use
, , or button for
  select,andmovecursorto“OK”,
then press
Enter button for confirm
you selection. If you want to cancel
this operation, move cursor to
  “Cancel”andpress
Enter button
for close this setting.
󱌶Press
Menu or Exit button to
return.
Note: It will be invalid if the current
source is not TV.
■ Selecting Channel
󱌮Press CH +/- button on the remote control to search the channels, the channel
numbers will increase or decrease by 1 for each pressing excluding the
  skippedchannels.
󱌰Press number buttons 0~9 to select the corresponding channel content. If the
channel number is bigger than 9, just press the two number buttons
successively. If the channel number is bigger than 100, just press the three
number buttons successively. The time interval should not exceed 2 seconds.
 previous next